Performance Curve - TD-2000/315SIL

Description

The TD Silent Series of low-profile mixed-flow in-line fans incorporates a break-through in noise reduction resulting in units that operate very quietly. The low noise levels are achieved through the technically advanced design of the internal construction, which does not impede on the air flow performance of the fan.
There are 6 models in the series, ranging from 100 to 315mm diameter spigot sizes.

Features

High performance mixed-flow impeller.
Low noise operation.
Vibration absorbing elements are integrated into the advanced body design.
360° rotating junction box makes connection of power cable easier (applicable for 100, 125, 150 and 200mm sizes only).
Integral mounting foot makes installation more simple.
1 to 30 minute run-on timer available on 100 to 200mm models.
Includes plug and lead for easy installation.
Convenient 2-speed motor, factory set to high speed (single speed on models with run-on timer).
Fan body can be easily removed without disturbing connected ductwork.

Construction
Casings manufactured from epoxy coated steel. Impellers are made of aluminium and of mixed-flow design.

Motors
Type: Standard models - 2-speed, squirrel cage induction motor.
Models with run-on timer - Single-speed, squirrel cage induction motor.
Electricity supply - 230V, single-phase, 50Hz.
Bearings - sealed for life, ball.
Speed-controllable using VA type speed controllers in high speed only. Not applicable to models with run-on timer.
Class B Insulation, IP44.

Internal Thermal Protection
Manual-reset thermal overload protection device in accordance with mandatory requirements for in-line fans, AS/NZS60335-2-80:2004

Testing
Air flow tests to ISO5801: Part1, 1997 and AMCA 210-99
Noise to ISO 13347-3 2004

Suggested Specification

The In-line fans shall be of the TD Silent Series as supplied by Fantech Pty. Ltd.
Impellers shall be of mixed-flow design and driven by single-phase motors with thermal overload protection.
Fans shall include vibration absorbing elements and sound absorbing material.
They shall also include an integral mounting foot and a power lead with plug.
The fan body can be removed without disturbing connecting ductwork.
All fans shall be fully tested to ISO5801: Part 1, 1997 or AMCA 210-99 for air flow and ISO13347-3, 2004 for noise.

Technical Data - TD-2000/315SIL

Setting	Speed [rps]	Avg. dBA @ 3m	kWatts (Input)	Amps	Max.°C	Approx. Weight [kg]
Lo	38	44	0.19	0.79	60	25
Hi	45	50	0.29	1.28	60	25

Sound Data

Setting	Type	63	125	250	500	1K	2K	4K	8K
Hi	Breakout	49	53	56	52	56	53	49	44
Hi	Inlet	60	65	72	65	65	63	59	56
Hi	Outlet	64	71	75	70	73	64	50	50
Lo	Breakout	50	56	52	47	50	46	43	37
Lo	Inlet	60	63	68	59	58	55	52	48
Lo	Outlet	60	69	69	65	66	57	43	42

Dimensions

A	B	C	D	E	F	G	H
432	335	373	312	260	192	825	152

*All dimensions in mm, unless otherwise stated

Wiring Diagram

Diagram shown is for single-speed only.
For 2-speed and special motors, contact Fantech for details.

Ancillaries

RSK315 Backdraft Damper	MCA-2000/315 Backdraft Damper	FC31 Fast Clamps	FGR315 Filter Units	MRJ-2000/315 Inlet Grille
RED031-030 Ø315 to Ø300 Reducer	Electronic Speed Controller